Golf bag putter clip modified - no glue, different sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a dovetail with endstop to avoid glueing the pieces. Different shaft diameters.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
I modified the original model to avoid the need for glueing the two pieces together.
I realized that I needed a putter holder for a larger shaft diameter. So I added a holder for 15.3mm shaft diameter while the original one is 13.8mm.
Let me know in the comments if you need another diameter. I can easily add further holders.
Assembly: It requires considerable force to put the pieces together. I used a vice to push the putter holder onto the bag clip. It might also work to put it on with a hammer. If you use a hammer put a piece of wood inbetween to protect the plastic.
Printing:
PETG (PLA may also be ok)
0.2mm layers
6 perimeters to avoid infill at the bent part of the bag clip
support at the dovetail of the bag clip
If you find my designs useful, you might consider buying me a coffee. But of course, you don't have to - my designs are free and always will be.