1 / 5
Half Pint Regular Mouth Jelly Jar Beer Crate 2x3 — zdjęcie 1
1 / 5

Half Pint Regular Mouth Jelly Jar Beer Crate 2x3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Crate for stackable storage of half-pint regular-mouth jelly jars (narrow-mouth jars) from Ball and Kerr, and similar

Ocena
0 / 5
Polubienia
4
Pobrania
8
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Crate for stackable storage of half-pint regular-mouth jars (narrow-mouth jars) from Ball and Kerr, and any similar sized jars.  

I took the source model and imported it into Blender, resized (some scaling, some selective stretching) for these jars, decreased the thickness of the walls, reduced overhangs by angling them to be self-supporting, reduced the hard corners that tend to gather dust and become hard to clean, and I made other general tweaks to reduce material use and smooth out some of the quirks that came from the resize and thickness modifications.  I also removed some of the long horizontal ribbing to use less material and less overhangs, since I've had issues with some milk crates with long horizontal overhangs. 

This is similar to but distinct from https://www.printables.com/model/1701116-half-pint-wide-mouth-jar-beer-crate and https://www.printables.com/model/1787607-pint-wide-mouth-jar-beer-crate which are both designed for wide-mouth jars.  This one holds six jars (2x3 arrangement) and the others hold four (2x2 arrangement) and the jars are not the same diameter or height.  All are derived from the same source model.

If you like this or prefer another size, check the below for two different form factors for wide-mouth jars:

Tagi