Doctor Who - Tom Yardley-Jones TARDIS (1980) - 5.5" scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A painstakingly close replica of the Tom Yardley-Jones TARDIS prop, as seen in Season 18 of classic Doctor Who.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Standard Digital File License
DESCRIPTION
This is a painstakingly close replica of the Tom Yardley-Jones TARDIS prop, as seen in Season 18 of classic Doctor Who.
The model is in scale with the 5.5" action figure line, and features fully-functional front doors to allow for a wide range of display.
In addition, the windows feature the 'pebbled glass' detail seen on the actual prop - however, since that doesn't play nice with FDM slicers, I've included a completely flat window model for them. (You can see a comparison of the clear resin vs clear PLA windows in slides 5 and 6 above.)
Assembly is mostly friction-fit, though glue is needed for some parts - I've included more detail in the 'ASSEMBLY' section below.
Thanks to:
Tony Farrell, over at TARDISBuilders.com, for his invaluable work putting together the plans for the prop
Brookster3D, on Cults3D, for their amazing line of TARDIS designs, which I used as reference for how to put everything together - check the models out, they're great!
Pepsiman98, Theta Sigma, and Scarfwearer, also over on TARDISBuilders, for the door and top signage - I've made a PDF with the signs correctly sized for the model here.
PS: The handle on the right-side door is too high in the photos and render - it's been corrected on the actual model. The two handles being at different levels is something explicitly flagged in dialogue between the Doctor and Adric, so I thought it an important detail to get right.
PRINT SETTINGS
For the FDM parts (so everything except the detailed windows), I used a 0.16mm layer height with 25% gyroid infill.
The only part actually needing supports is the roof, though the right door may also print better with them (specifically the overhanging central lip).
Everything except the windows and lamp was printed in light blue PLA; the FDM windows were printed in clear PLA, while the lamp was printed in both, using Bambu's AMS.
Meanwhile, the SLA windows were printed in clear resin at 0.025mm layer height.
ASSEMBLY
Glue the lamp and the four sign boxes to the roof - the join for the latter is shown in the very last photo above.
Glue the windows to the inside of the side panels and doors. Keep in mind that there are two different thicknesses of windows - the thinner ones are intended for the front doors.
Slot the four corner posts and three side panels into the roof.
Place the assembly into the base such that the back is slotted in, but the front isn't yet.
Slot the bottom pegs on the two doors into the holes in the base.
Now, slot the front of the roof+sides assembly, making sure the top pegs also align with the holes in the front-facing sign box.
Getting the doors in is admittedly finicky, but this is the most consistent method I could think of - do let me know if you have something better.
Also, if you're not planning to disassemble the model at all, I would recommend adding spots of glue to the slots in the base, to keep everything together.