1 / 8
Dichtung Deckel WMF mini Dampfgarer - Seal for the lid of the WMF mini steamer — zdjęcie 1
1 / 8

Dichtung Deckel WMF mini Dampfgarer - Seal for the lid of the WMF mini steamer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Eine TPU-Dichtung für den Deckel, wenn man 7 cm hohe Dampfkörbe verwendet. -> V2

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Eine Dichtung für den Deckel.

Ich hatte mir für Gemüse zwei kleine Edelstahl-Frittierkörbe gekauft. Diese sollten eigentlich nicht höher als 6 cm sein. Leider stimmten die Maße nicht und der Deckel schloß nicht mehr mit der Garschale ab.

Also konstruierte ich schnell eine Dichtung, welche den Abstand vergrößert.

-> Update: Neue Kontur. Höherer u. breiterer Rand . Dadurch bessere Passform, stabiler Sitz auf der Wanne und der Deckel klemmt nicht mehr.

Als Zwischenstück bei zwei Wannen kann man die Dichtung auch verwenden.

Werkstoff: TPU 95A

Düse: 0,6

Schichthöhe: 0,2 mm

Wände: 3

Decke und Boden: 0,6 mm

Infill: 30% Gyroid

A gasket for the lid.

I had bought two small stainless steel frying baskets for vegetables. They were supposed to be no taller than 6 cm. Unfortunately, the dimensions were off, and the lid no longer sealed properly against the cooking tray.

So I quickly designed a gasket to increase the clearance.

-> Update: New shape. Higher and wider rim. This provides a better fit, a more secure hold on the tub, and the lid no longer gets stuck.

The gasket can also be used as a spacer between two tubs.

Material: TPU 95A

Nozzle: 0,6

Layer height: 0.2 mm

Walls: 3

Top and bottom: 0.6 mm

Infill: 30% Gyroid

Tagi