GameOverse Enamel Pin Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple print to display the enamel pins from the Glitch Production show GameOverse using their Gameboy cartridge back.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Printer settings:
.1mm height
.4 Nozzle
40% infill
PLA
I wanted to make a holder for the enamel pins that plays off the idea that they're Gameboy cartridges, so this stand has the same shape as the back of a Gameboy. The curve on the outside and the stark sharp straight inside profile.
Did a lot of trial and error (seen in the photos) to get a nice fit, but not too clunky!
Pretty simple print. Just slide the sucker in when its done!
I don't think it needs to be weighted all that much, I still jacked up the infill just to help. The pins naturally lean back towards the big flap so it only tips when pushed.