1 / 1
GC8 WRX Fuel Tank Blanks for Subaru — zdjęcie 1

GC8 WRX Fuel Tank Blanks for Subaru

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fuel tank covers

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

My fuel tank went rusty, so I treated it with Citric Acid, to stop it from leaking I used a cheap 'all-clear' silicone glue to seal these covers and stop the liquid getting out. I printed the Hose plugs in TPU. At one point this did result in the tank being completely sealed and gas built up inside starting to distort the tank, so ... be wary. The covers should be printed with a few more walls than standard, they're 6mm thick, but still managed to bow a bit when I was tightening them down.