Insta360 mount for 3dmakerpro Raven (no GPS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Secure an Insta360 camera to the 3dmakerpro Raven, without GPS antenna attachment
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Printable Insta360 camera mount for the 3dmakerpro raven. Includes a hole for the GPS antenna connection but not a separate mount for the GPS antenna itself. Has tabs to prevent the camera from rotating. I used M3x8 socket head cap screws with one washer to secure to the Raven, and a 1/4-20 screw to attach the Insta360. I think a short thumb screw for that would be best, though in my picture it's a regular screw with a fat stack of washers because it's all I had on hand.
In this model, the base of the camera is 53mm above the Raven unit. I meant to do 50mm based on measuring the proportions of a picture of their official mount compared to my Insta360. However, it's not worth changing anything until either myself or someone is actually able to get Raystudio to process panoramic video or I receive the official mount and measure it.
Designed in solidworks xdesign for makers. Printed with tree supports. Will likely improve this more after additional field testing.