1 / 1
Trotec AC to 150mm Counterclockwise Hose Connector — zdjęcie 1

Trotec AC to 150mm Counterclockwise Hose Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement connector for the Trotec PAC 2000 E Air Conditioner

Ocena
0 / 5
Polubienia
0
Pobrania
21
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement AC unit to hose adapter for my Trotec PAC 2000 E portable AC unit. It came with a non-standard 145mm clockwise hose, annoyingly, and I wanted to use a longer 150mm diameter hose with a counterclockwise screw thread.

Like the original, this has tapered ears on the AC mount, and the thin end is what should be slid in first to aid attachment. Unlike the original, I couldn't be bothered to label which side this is, so you may want to add that in the slicer.

I printed mine with a 0.6mm nozzle with 3 walls in PETG, and I highly recommend printing it at 45º to ensure the shear angle of the layers doesn't align with the main forces applied to it. Similarly, I used a random seam position. Both standard and tree supports are a bit of a pain in the arse to remove, so I would recommend adjusting your settings to make them easier or using PLA as the support material if you have multimaterial support.

I have a model for adapting the window connector at the other end as well: 

Tagi