Duet 3 Case (SBC & 2x External Driver)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duet 3 Case made to be mounted onto Aluminum Extrusion. Support 40mm fan, I used a noctua NF-A4x10 (40mmx10mm) Print…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Duet 3 Case made to be mounted onto Aluminum Extrusion.
Support 40mm fan, I used a noctua NF-A4x10 (40mmx10mm)
Print with Supports if you don't have good bridging, if you do you you're fine, mine(pictured) was done without supports..
SBC Mounts with M2 Screws.
Mount Holes to Chassis / Extrusion is made for Low Profile M5 screws (Openbuilds Style)
Cable Stops Mount with M3 Screws.
Duet 3 Mainboard Mounts with M3 Screws.
Duet External Drive Boards Mount with M3 Screws.
Cover Plate Mounts with M3 Screws.
Print Settings
Printer:
Custom Made Cartesian w/ Servos
Rafts:
No
Supports:
Yes
Resolution:
.4
Infill:
20
Filament:
WYZ Works / Amazon PETG
Translucent Purple
Category: 3D Printer Parts