Hyperlow Airshot - Flat Arm Guard / Landing Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wireguards / Landing feet for Hyperlow Airshot Flat Arms. Height of feet is just enough to clear immortal T front…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wireguards / Landing feet for Hyperlow Airshot Flat Arms.
Height of feet is just enough to clear immortal T front mounts
Tab on side for extra material when using soldering iron to close the wrap-around.
Tapered to fit the arm perfectly.
5 Variants:
V0 = Foot with Flat, allows safe spot to mount individual ESCs.
V1 = Topside mount with only wire guards
V2 = Topside mount with cutout for Hyperlow RaceWire / LED, includes wire guards
V3 = Underside mount with cutout for Hyperlow Race Wire / LED and one wire guard.
*Requires you roll motor wire over to the underside of the arm.
V5 = Foot Only
No supports needed if your bridging settings are spot on
Print vertically with Foot down for no supports / minimal supports
Print Settings
Printer:
Custom Made Cartesian w/ Servos
Resolution:
0.4
Infill:
100%
Filament:
Sainsmart TPU
Purple
Category: R/C Vehicles