Volador VX3.5 - O4 Pro Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DJI O4 Pro spacer for improved cable clearance and vibration isolation. Works in PLA, TPU recommended.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
I had some clearance issues with my DJI O4 Pro due to the battery cable routing, so I designed these spacers to create additional room underneath the unit.
The DJI O4 Pro sits slightly higher, allowing battery cables and other wiring to pass cleanly underneath without being pinched or bent.
I printed the spacers in PLA, and they work well, but I believe TPU would be an even better choice as it can provide additional vibration damping. For my build, I also used Gelly Duo vibration dampers.
I hope you find this design useful! If you have any suggestions or need any modifications, feel free to let me know.