Bondtech Extruder Mount w/ BLTouch (OpenBuilds Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Openbuilds C-Beam gantry plate (http://openbuildspartstore.com/c-beam-gantry-plate/) to setup for 1 Bondtech…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Mount for Openbuilds C-Beam gantry plate (http://openbuildspartstore.com/c-beam-gantry-plate/) to setup for 1 Bondtech BMG extruder.
All holes that are not recessed will accept an M4 screw used in a self tapping method.
The Recessed holes will allow an M5 (openbuils standard low profile) screw to pass through to the threaded holes on the C-Beam plate without sticking out.
BLTouch mount uses M3 screws directly into plastic.
Mounting is based on the aluminum bracket that bondtech sells.
The top plate is for mounting a cable chain and just clears the C-Beam when mounted by ~1mm.
Side holes are for mounting part cooler(s)
Uses fan mount from my Dual BMG head which can be found here. https://www.thingiverse.com/thing:2641895
Print Settings
Printer:
Self Built Cartesian Style
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.4
Infill:
100% Recommended for stiffness
Category: 3D Printer Parts