Kingsong F22 Pro Bumper Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement kit for the Kingsong F22 Pro for both back and front bumpers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The kit consist of three parts for each bumper.
The Suspension Support (2 per bumper, left and right sides are mirrors of each other)
The vertical Bumper (2 per bumper, left and right sides are mirrors of each other)
The horizontal Handle Bar (1 per bumper covers original handle bar)
You will also need to use the holding pins to lock the parts together.
Print and Build Directions:
The design is easy to understand and put together
I print the suspension support in PEGT for strength. 8-12 outer walls, top and bottom surface for strength. infill at 15%. left is a mirror of the right.
I print the vertical bumpers in TPU 8-12 outer walls, top and bottom surface for strength. infill at 15%.. left is a mirror of the right.
The horizontal handle bar can be printed with 4 outer wall, top and bottom surface.
The Pegs are of varying sized for the front and back bumpers.
6 Pegs-front for front (3 for each side)
2 Handle Peg-front (1 for each side)
6 Pegs-back for front (3 for each side)
2 Handle Peg-back (1 for each side)
Bottom bumper is printed with PETG (4 is needed, 2 needs to be mirrored in slicer) It is simply screwed in from the back side of the bottom suspension cover. see pics.
Design Update
V2 of the bumpers (Front Back and Bottom) work with the original Suspension Support. It brings the bumpers closer to the wheel and make the design language more uniform.