Concrete cubic planter mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reusable 3D printable mold for casting cubic concrete planters.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Reusable 3D printable mold for casting cubic concrete planters.
The mold features a removable side-wall system for easier demolding and can be reused multiple times when properly maintained. Suitable for concrete, cement, plaster, and other casting materials.
If you enjoy this model and would like to support my work, or if you plan to use it for commercial purposes, please consider purchasing it on Cults3D.
https://cults3d.com/es/modelo-3d/casa/concrete-cubic-planter-mold
Printing Parameters
No supports required
Recommended materials: PETG, ABS, or ASA
Use high wall count and high infill for maximum durability
Print all parts with the provided orientation
Usage
Before pouring concrete, apply a thin layer of oil to the inside surfaces of the mold. Regular cooking oil works well and helps release the planter after curing.
For best results:
Vibrate or tap the mold gently to remove trapped air bubbles.
Allow the concrete to cure sufficiently before demolding.
Clean the mold after each use to extend its lifespan.