1 / 4
Prusa Core One L Handle PTFE Bowden Tube Connector (PC4-M6)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified side handle for the Prusa CORE One L with a PC4-M6 fitting to connect PTFE Bowden tubes!
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 29
- Wydruki
- 2
- Wyświetlenia
- 204
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
Side handle for Prusa Core ONE L with connector for PTFE bowden tube. I recommend removing the original collet from the side filament sensor, but this is not necessary, it will just make disassembly easier.
Print settings:
Material: PETG
Layer height: 0.2 mm
Walls: 3
Infill: ≥ 20%
If you want to thank me https://ko-fi.com/maxpi
or use my referral to buy a printer @MaxPi