PHILIPS AVENT CAMERA HOLDER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Robust Philips Avent camera mount. It prints completely without supports.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a robust 3D printable camera mount designed for the Philips Avent baby monitor. It prints completely without supports and looks great. You can attach it to a baby crib, bed headboard, or any other furniture.
The mounting screw is reinforced with an internal block so it will not crack when tightened. You only need to print one reinforcement block. I provided several variations with different clearances from 0.025mm to 0.1mm because every printer and filament is different.
Personally, the 0.05mm gap works best for me. I had to use a small hammer to tap it in, but it holds perfectly. The 0.075mm version went in too easily for my setup.