Halterung für Specialized Turbo Connect TCD Fahrradcomputer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Specialized Turbo Connect TCD Fahrradcomputer
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The mounting tab on my bike computer had broken. With this new holder (shell), the bike computer can be securely mounted on the bike again.
Printed in PA‑CF, 0.2 mm layer height, lying flat as shown. Supports: Tree supports, narrow; adjust spacing depending on filament. Cooling: Slightly higher than usual due to some overhangs.
The shell is screwed onto the original mount and then secured with a nut and a thrust washer (see model). The press‑fit nut of the original mount must be removed beforehand.
Bei meinem Fahrradcomputer war die Lasche gebrochen. Mit dieser neuen Halterung (Schale) kann der Fahrradcomputer wieder sicher am Bike montiert werden.
Gedruckt in PA‑CF, 0,2 mm Layerhöhe, liegend wie abgebildet. Stützen: Baumstruktur, schmal; Abstände je nach Filament anpassen. Kühlung: Etwas stärker als üblich, da einige Überhänge vorhanden sind.
Die Schale wird auf die Originalhalterung geschraubt und anschließend mit einer Mutter und einer Lagerscheibe (siehe Modell) gekontert. Dazu muss die Einpressmutter der Originalhalterung entfernt werden.