Motorbike Helmet Hook - For Honda XSR900GP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motorbike Helmet Hook - For Honda XSR900GP
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a helmet hook to suit the Honda XSR900GP, to attached the helmet under the seat cover.
Intended for internal use only.
I recommend the following:
print in ABS or ASA, for thermal/environmental resistance
print in the orientation as per the provided file, this will provide better strength
use supports while printing
50% infill at a minimum
0.2mm layer height.
Obviously this isn't as strong as an alloy/aluminum part, however I have found it to be reliable so far.
I have tested this for several days, with a 5KG weight attached to it, without any issues.
Use at your own risk.
