Andor season 2 prop - No4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Was asked if I could produce this, via the RPF [forum]. Based off a similar size 'square' hip flask.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another ANDOR zine, mini prop replica.
I've included the .stp files for those who want to modify. The cap has an additional ring which has to be trimmed to fit around the lower diameter of the cap once the 'cap catch' is fitted. Glue the ring in place to secure the catch, which allows the cap to rotate freely.
As you can see [red filament picture], horizontal, this wasn't the best orientation lol, a vertical one would be better suited to the front detail, but this was the main item requested. The catch arm is pivoted and I drew this up as a separate part to be glued on at the position that best suited being able to lift off the cap.
I made a few alterations, for myself to be happy, before I uploaded the files