Aqara Pet Feeder C1 Bowl Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design your own food tray holder
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
I have two cats and the food bowl was simply too small for them as they tend to eat from the same bowl at the same time. I designed the parts and you can use them to fit them for your preferred bowl.
I added photos of the dimensions in case you want to fully design your own. Alternatively you can use the "disassembled" parts of the dovetail to attach them in the slicer and combine them to your part to form one part.
The dovetail has some clearance, 0.5mm, which is a bit much but the pets will move the bowl and if it's too stiff it might break.
For my preferred bowl I had to extend the dovetail section to fit the bowl under the spout.
Printed in PLA, 15% infill, 3 walls