Sky Watcher 150p 130p Virtuoso GTI Focuser Bushing Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bushing screws directly into the stock focuser location without modification. It than accepts the SVBony focuser.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
You can use this bushing to adapt directly to the upper half of this Svbony helical focuser adapter:
https://www.svbony.com/products/m42x0-75-reflector
Because the bushing is so low profile and the Focuser is as well, the focal length of the scope/lenses is nearly unaffected. Total length difference (especially if you remove the lock ring on the SVBONY is under 6mm.
This design is made to be tight and "lock" the bushing in place. If you need more focusing length, you can use the knurls to spin the bushing out to increase total active length.
