1 / 9
glove80 spacer, tenting, mount and armrest
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer between two halves of glove80 in various configurationNow with integrated arm rests.recommend using…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A spacer between two halves of glove80 in various configuration
Now with integrated arm rests.
recommend using with https://stl.beta.glove80.com/stl/leg_adapter on the upper two legs on each half for tilting
- prepare a lot of 10mm or 3/8 " rubber(rubber, not silicone) feet for gloves and the adapter use.
- glue or weld 12degree_assembly_l and 12degree_assembly_r together.
- so you see there's a trapezoidal void in between. it saves some filament, but i recommend don't put a pointer device there. twisting one's wrist inward can never be a good idea no matter how clean it looks aesthetically.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 V3 KE
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1~0.3mm
Infill:
5% or more
Category: 3D Printer Accessories