1 / 4
52 mm Tube Insert Cap for 61 mm Round Steel Tube - Hidden Ventilation — zdjęcie 1
1 / 4

52 mm Tube Insert Cap for 61 mm Round Steel Tube - Hidden Ventilation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ventilated tube insert cap for 52 mm ID round tubes, designed to reduce condensation and pressure buildup.

Ocena
0 / 5
Polubienia
5
Pobrania
13
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Ventilated Tube End Cap for 52 mm ID / 61 mm OD Steel Tubes

This tube insert cap was designed for round steel tubes with an internal diameter of approximately 52 mm and an external diameter of approximately 61 mm.

At first glance, it looks like a standard tube cap, but the design includes a hidden ventilation channel that allows the tube to breathe while maintaining a clean exterior appearance. This helps reduce condensation buildup inside the tube and provides pressure equalization, preventing moisture from becoming trapped over time.

The ventilation channel is concealed beneath the outer flange, so airflow is maintained without visible openings on the top surface.

A Small Story Behind the Design

This project became something special because I designed it together with my 13-year-old daughter.

While we were sketching ideas for the tube cap, she was the first to point out that a completely sealed tube could trap moisture and air pressure inside. More importantly, she didn't stop at identifying the problem - she immediately started thinking about how to solve it.

The hidden ventilation system used in this design was actually her idea. She suggested creating an internal channel that would allow the tube to breathe while keeping the outside appearance clean and protected.

I refined the design and prepared it for printing, but the concept itself came from her observation and solution.

So if you download this model, please join me in congratulating her on a genuinely engineering-minded idea. At just 13 years old, she not only spotted a practical design flaw but also proposed the solution that became one of the key features of this model.

Recommended Print Settings

  • Material: PETG

  • Layer Height: 0.16 mm

  • Infill: 10% Gyroid

  • Walls: 4 Perimeters

  • Top Layers: 6

  • Bottom Layers: 6

These settings provided excellent strength, durability, and material efficiency during testing.

Specifications

  • Tube Internal Diameter (ID): 52 mm

  • Tube External Diameter (OD): 61 mm

  • Material Tested: PETG

  • Supports: Not Required

Features

  • Designed for 52 mm ID round steel tubes

  • Hidden ventilation channel

  • Helps reduce condensation buildup

  • Allows decompression and pressure equalization

  • Clean and professional appearance

  • Strong and durable PETG design

  • No supports required

  • Easy and reliable printing

Suitable Applications

  • Metal furniture frames

  • Workshop equipment

  • Outdoor structures

  • DIY projects

  • Industrial tube systems

  • Protective tube finishing

The model was printed and tested in PETG and is intended for long-term practical use. PETG is recommended due to its impact resistance, flexibility, and weather durability.

Depending on tube manufacturing tolerances, printer calibration, and material shrinkage, minor scaling adjustments may be required to achieve the perfect fit.

Happy printing!

Tagi