1 / 2
Rubber part for the choke lever on a Vespa (GS160) — zdjęcie 1
1 / 2

Rubber part for the choke lever on a Vespa (GS160)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It can replace the original rubber part (see photos). Bottom and top parts must be glued together.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Don't use PLA as it does not support sun temperature. Once both parts printed, heat the head of the lever to easily fit in the bottom part; then glue the top part.

Tagi