Desk Clamp-on Stationery Holder

A screw-on clamp for any desk, it can organize your pens, pencils, rulers, tools, and even act as a trash can! Remixed from ChrisAeroEngineering’s Headset Holder V2, my modification lets anyone design their own clamp-on module with a simple adapter (See here: ).

Let me know if you want me to design a custom module just for you! 

Also, please post your makes! Your feedback is greatly appreciated! :)

The sliding latch is VERY secure, and only extreme force can be used to separate the pieces. You won’t break anything though!

NO SUPPORTS NEEDED AT ALL!

Printing:

I printed this one in ESun PLA at a 0.25mm layer height with the default 0.25mm SPEED, no supports. Even though the threads didn't print perfectly, kudos to ChrisAeroEngineering's design because still works with slightly oozed threads.

Everything can fit onto one build plate, but I suggest printing the giant BucketV1 (or your custom attachment) by itself to reduce print failure.

Check and make sure everything is oriented just like the second photo. I’ll also provide an .stl file with everything correctly oriented called:

All_Parts_ClampOn-Organizer.stl (for the 2 Compartment Version) 

and All_Parts_Bucket_1Compartment.stl (for the 1 Compartment version)

Assembly:

To make the full Stationery Clamp On Organizer, you need:

• 1x ClampOnV3.stl – You can use organic supports for the thread, but only if you want to.

• 1x Clamp_Screw_50mm.stl

• 2x Bottom V1.stl

• 1x Bucket_2Compartment.stl - Orient so the latch is close to the print bed for no supports! (SEE IMAGES)

  • You can also use Bucket_1Compartment.stl if you want a single container rather than 2. You'll only need one Bottom V1.stl

NOTE: ClampOnV3 is based on the standard clamp from ChrisAeroEngineering's design. Let me know if you need longer 'jaws' or a different spacing between the jaws!

OPTIONAL:

• 1x Divider_to_QUARTER.stl to make 4 'compartments' for your pens/pencils & other stuff

• 1x Divider_to_EIGHTHS.stl to make 8 'compartments' for your pens/pencils & other stuff

• 1x Divider_to_HALF.stl to make 2 'compartments' for one square organizer

To actually assemble the whole thing, 

1. Slide the latch together until a click is felt/heard

2. Screw the screw into the ClampOnV3

3. Drop the BottomV1 into the Compartment, Small side down.

Let me know if you have problems with assembling, I'd be happy to help!

Enjoy!

btw I'll post the STEPs later, my Onshape isn't letting me download them (idk why)