Dial indicator holders and Crankshaft jig for Honda NSR 125 gatito approved
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled this crankshaft alignment jig in Fusion for my project bike
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Just a quick crank jig, i made the Spacer and Reducer specifically to true a NSR125 crankshaft. i made the dimensions quite generous for bigger bikes in the future. it mounts to the bed of my mill, and i used a dial indicator holder to measure runout.
EDIT 08.06.2026
added universal dial indicator holders
only print the two mirrored parts if youre a perfectionist and want to access the bolts for adjusting the dial indicator holders bolts while attached to a surface (highly recommended)
HARDWARE NEEDED per indicator holder :
3x countersunk bolt m6x20
3x nut m6 (optionally self securing)
1x cylinder head bolt M4x15
1x nut M4 (self securing recommended)
ELSE:
the Parts mount to a surface with 10mm holes