Star Wars Omega's Shuttle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of Omega's shuttle from the epilogue of Star Wars: The Bad Batch with moving wings
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
This shuttle appears in the epilogue of Star Wars: The Bad Batch (S3E15). It is flown by the clone Omega.
I don't know of any official name or specifications.
A few specifications can be deduced from its (only) appearance. It is armed with two forward-facing cannons and a turret at the back. The turret seems to be taken from the Omicron Shuttle, which would put the total length of this ship at around 17m. It also has two folding wings.
The wings on this model can move and are print-in-place. This model also has a hole compatible with small pin and medium base (link).
Dimensions
Length | Width | Height |
|---|---|---|
65mm | 35.5mm | 21.3mm |
I've scaled it so that the turret is the same size as on the Omicron Shuttle.
Print Instructions
Printed at 0.15mm layer height.
Requires supports on buildplate.
The model includes four small support pillars between the roof of the ship and the underside of the top wing. They should be removed after printing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#