HYDRO 7 Printable Jointed Figure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Say hello to Hydro 7, a fully printable, articulated, poseable, and modular action figure!
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 487
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
Introducing Hydro 7!
Say hello to Hydro 7, a fully printable, articulated, poseable, and modular action figure!
Print settings:
Material | Armor | Any |
Joints | PETG, ABS, ASA | |
Layer height | First layer | 0.2 mm |
Other layers | 0.15 mm | |
Number of perimeters | 2 | |
Infill | 15%, Grid | |
First layer speed | 25% of default | |
Elephant foot compensation | 0.15 mm | |
Supports | None | |
Brim | None (depends on bed adhesion) | |
Perimeter generator | Arachne | |
Additional settings | ☑ Print external perimeters first OR ☑ Only one perimeter on first layer | |
Fun fact: I started working on the original prototypes all the way back in January, crazy, right?
Hope you enjoy! :)
Update 7/1/26: Completely redid the knee and elbow joint to have way more articulation
Update 7/3/26: Added an assembly guide