1 / 5
Turnigy Reaktor 250W 10A Stand 45° tilt — zdjęcie 1
1 / 5

Turnigy Reaktor 250W 10A Stand 45° tilt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 45° tilted stand for the Turnigy Reaktor 250W Charger. It's designed to print quite easy and then be screwed…

Ocena
0 / 5
Polubienia
5
Pobrania
17
Wydruki
0
Wyświetlenia
245
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

This is a 45° tilted stand for the Turnigy Reaktor 250W Charger.

It's designed to print quite easy and then be screwed together with 6 m3x16 screws.

This set of screws from banggood works very well and is very handy to have for a lot of diy projects https://goo.gl/wtDXYP

Print Settings

Printer:

Mini Fabrikator

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%


Notes:

Printed at 40mm/s with cooling fans on full speed for the cross.

Category: R/C Vehicles

Tagi