6x5 6u case stacking system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store and stack multiple 6x5 cases without having to move the ones on top of the one you want.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this with the excellent model by @PeterDesigns
I wanted a way to stack multiple cases and get to any of them without having to move all the cases on top of the one I wanted so I made this. It's designed to hold 6U in a 6x5 configuration. There's left and right brackets and three different spacer bars. The thinnest goes on the top and bottom shelf, the thickest one goes between shelves, and the middle thickness one goes on the back side. There's holes on the side brackets so you can attach it to some 2020 extrusion so that it can be lifted off your worksurface and attach multiple stacks together.
#The bins were a little snug after printing a few of these, so I added another 2mm to the length of the bars. I also created a 12u high version if you want to use double height bins and cases too.