1 / 2
Prism Wall Hook — Faceted Designer Coat / Towel / Key Hook (Screw-Mount, No Supports) — zdjęcie 1
1 / 2

Prism Wall Hook — Faceted Designer Coat / Towel / Key Hook (Screw-Mount, No Supports)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prism Wall Hook — Faceted Designer Coat / Towel / Key Hook (Screw-Mount, No Supports)

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial
A sharp little faceted wall hook for coats, towels, bags, keys or dog leads. The angular "Prism" face looks like cut crystal; the flat back and two countersunk screw holes mount flush to any wall. Prints as one solid piece — strong enough for everyday loads in PETG or PLA+.

• 96 mm tall, projects ~34 mm
• Two screw holes (plugs + screws) or stick-on tape for light loads
• Print flat back down; PETG/PLA+, 4 walls, 30–40% infill
• *Light support only if your slicer flags the hook curve

Print a row of them for an entry-way or behind a door.