Sodastream Crystal adaptor regular PET bottle 0.5l 23cm height
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SodaStream Crystal with regular 0.5l PET bottles
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi.
I got rid of glass-bottles with broken threads.
This is my very first DIY project. I couldn't find a pre-designed adapter for the old SodaStream Crystal that would work with regular 0.5L PET bottles (e.g., the German PET bottles from PepsiCo with a 23 cm height). So I ended up making one of my own. The inner thread of my adapter uses the PCO1881 standard for newer bottles.
I used PETG with 30% infill and 4 wall lines.
A step that might be necessary before using the adapter:
Gently heat up/soften the lower inner corner near the thread. Immediately screw the adapter close to the bottle neck to ensure a good seal.. Once cooled, blow into the adapter to check for any leaks/blow-by.
Please feel free to suggest changes or help me improve the design!