MT3608 Step-Up Adjustable DC-DC Switching Boost Converter snap case / holder / knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MT3608 Step-Up Adjustable DC-DC Switching Boost Converter snap case / holder / knob
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 179
- Wydruki
- 2
- Wyświetlenia
- 971
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
It's a remix from https://www.thingiverse.com/thing:3370199
This is a simple snap case print to keep you from burning your fingers on the hot choke coil of the MT3608 voltage boost module. - No additional screws required! -
Please note that the case pinches the wire to the circuit board in one instance, and to the case itself in the second. Take care, and probably a blunt tool, to get the board and wires into the case to attain an effective strain relief.
To use the strain relief effectively, you need ~1.8mm of thickness. The more pressure on the wire insulation, the stronger the cover fits on due to wall deflection.
Technicals: These MT3608 modules are rated for 2 amps. These get hot at 2 amps! I might suggest keeping that in mind when handling or even packaging these modules. Most of my applications run under 1 amp making these great inline voltage boosters.
I added a knob to help adjust the voltage
