1 / 4
Your Feet Stink! Modular Shoe Fresheners — zdjęcie 1
1 / 4

Your Feet Stink! Modular Shoe Fresheners

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Helps reduce shoe odour using a modular stacked deodourizer pod

Ocena
0 / 5
Polubienia
8
Pobrania
9
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a multilayer deodourizing system designed to fit into most shoe sizes.

Printing

I printed all of the pictured parts in black PETG with a 0.4mm nozzle and default settings.

Material

Tested in PETG, but any non-flexible filament material should work fine.

Nozzle and Layer Height

These parts are designed for a 0.4mm nozzle, but should also work on up to a 0.8mm beyond which I suspect the threads won't properly print. 

Print at 0.2mm or lower layer height for consistency in the threading.

Support and Orientation

The parts are oriented to print fine without support, so you should be able to just load and slice them.

How to Use

  1. Print your required parts (described below)

  2. Fill each compartment and twist together

  3. Put one deodourizer in each shoe

I personally like to use 1x Female Fragrance Holder, 1x Coupling and 1x Puck Holder. The puck holder contains a solid block of baking soda and activated carbon which actively absorbs and neutralises odour compounds, and the female fragrance holder acts as a fragrance diffuser with a small amount of cotton wool and a few drops of an oil-based fragrance. I've been using a cinnamon and apple oil but floral and fruity scents seem to work best.

Parts

Male/Female Fragrance Holder

Open on one side, perforated on the other with a threaded connection. Designed to hold cotton wool or similar materials to act as a fragrance diffuser. Can also be used with silica beads, powdered baking soda or other materials contained in a layer of filter paper. 

Deodourizer Coupling

Male thread on one end, female on the other with a perforated wall in between, can be connected to keep separate layers of material with airflow between them.

Puck Holder

An adapter to use my solid deodourizer pucks as the core deodourizing medium. It includes a hole in the base for improved airflow and also for pushing the spent pucks out at the end of use, while keeping them stable normally.

Remixing

Feel free to remix with your own attachments! The threads are designed with the following parameters:

  • pitch 3.0 mm

  • height 6.0 mm

  • depth 1.0 mm

Acknowledgement

Huge thanks to kevmasjedi for the Build123D Screw Thread generator used for the matching threaded parts. This saved me a lot of headache!

Tagi