TonBERRY pico test rig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Development hardware rig for the TonBERRY pico project.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
TonBERRY pico test rig
Visit the TonBERRY pico page for more information about this project.
The test rig consists of three parts:
The front plate holds the speaker. The mounting holes are for either a Visaton R10 S (or similiar) speaker, or a small mono speaker https://www.adafruit.com/product/3351 .
The base plate is available in two versions: For the Rev. 1 PCB (the larger PCB with the buttons mounted directly on the PCB, deprecated), and the Rev. 1.2 PCB plus an optional button board.
The RC522 holder clips onto the top and holds the RC522 NFC reader so that a tag or card can easily be placed on it.
Besides the 3D printed parts, you need some hardware:
M3x5x4 heat sink inserts: 8 for the Rev.1 PCB or if you aren't using a button board with the Rev. 1.2, or 12 for a Rev. 1.2 PCB plus button board.
M3x6 BHCS (button head) screws to mount the PCB(s): 4 or 8
M3x8 countersunk screws: 4, to mount the front plate to the base
M3x12 countersunk screws + M3 nuts: 4, to mount the RC522 to the holder
For the Visaton speaker: 4x M4x8 countersunk screws + 4x M4 nuts
For the ADA3351 speaker: 4x M3x? countersunk screws + 4x M3 nuts