Orbea Laufey 24/26 Lockr Downtube Storage Door & Latch – V1/V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Downtube Storage Door/Latch of Orbea Laufey
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a fall and broke the latch on the downtube storage of my Orbea Laufey. I had time to spend away from my bike so I did my best at reverse engineering the shape of the door. The handle needs to be moved from the original door. I did a test run, nothing fell off. Though I would imagine it is still not a permanent solution because it is lacking the rubber seal and would eventually let the water into your internal storage.
Printed horizontally on the narrow edge to make sure that the bottom latch is strong. Used PETG with 4 outer layers and 50% infill.
--------------------------------------------------------------------------------
V2 is slightly wider a little more curved to remove free play from the door when it is closed. My local store is quite slow on sending me a replacement. Been using the V1 for a frew month and now the V2. Neither of them broke on me.