Core One, Advanced filtration bypass redesigned V2a
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The option to use or not use the advanced filtration system depending on the filament being used.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 84
- Wydruki
- 3
- Wyświetlenia
- 451
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The same function as the design 'Prusa Core One / + / L - Advanced Filtration v2' by Favon
The new version (V2) has larger valves and fits on the CORE One, Core One+ and CORE One L and M3 inserts are optional. Version 2a has a more stable plasement of the side platen.
The design is made so that no support is needed.
Prusament PETG Galaxy Black/Orange, Infil 20%, Perimeters 4, no Brim
The frames for the left and right sides are identical.
The two parts are joined together using eight M3x20mm countersunk screws (you can use a M3 thead tap and some silicone grease on the screw threads to facilitate fastening). It is also possible to use M3 inserts or M3 V-coil inserts with M3x10 countersunk screws (The three variants can be seen in the photo).
Assemble all parts with the 8 screws before mounting them to the CORE One.
Use M3x6mm screws and nuts to secure the filter.
For correct assembly, see the photos. (Some photos are of an older version; there is no difference regarding assembly and parts.)
To make it easier to install the valves, they can be temporarily secured in the holder with tape.
You can also use it without the Advanced filtration by mounting the cover plate instead of the filter.
(With de stl file: 'CoreOne-Side-Closed.stl', you can customize the side panels as desired)
It is possible to switch between the internal fans and the Advanced filtration fans. - Before printing. ('Settings' > Chamber filtration > None or Adv. filtration). - During printing. (''Tune' > Chamber filtration > None or Adv. filtration). As far as I know, it is not possible to switch between these with gcode with the current firmware.