1 / 4
Brick-Compatible Stud Shooter Ammo (Replacement Studs) — zdjęcie 1
1 / 4

Brick-Compatible Stud Shooter Ammo (Replacement Studs)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A quick, 5-minute 3D printable replacement for lost Lego stud shooter ammunition. Designed to fit perfectly into standar

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Lost your minifigure's ammunition again? Print an infinite supply!

Every brick-building fan knows the struggle: you fire a stud shooter, and the tiny 1x1 round piece vanishes into the void under the sofa, never to be seen again. This is what happened to my 5-year-old, and it caused a lot of tears. This quick and easy 3D model solves that problem forever by providing a perfectly sized, 3D-printable replacement for standard stud shooter ammunition.

These printed studs fit perfectly into standard minifigure stud shooters and look great in a pile next to your figures. Just load them up and get back to the action! It’s a very simple 5-minute design, but it works like a charm. You can check the photos to see the detailed top and bottom structure of the printed models. They also fit perfectly onto standard building plates! :)

🖨 Print Settings & Recommendations

Because these parts are extremely small, careful slicer settings are required for the best fit and finish:

  • Layer Height: 0.2mm is fine, but 0.08mm or 0.12mm might help for smooth edges and accurate tolerances.

  • Nozzle: A standard 0.4mm nozzle works, but a 0.2mm nozzle will yield exceptional results.

  • Infill: 20% (These are so small that they will likely print as solid perimeters anyway).

  • Supports: None required. Print them flat on the build plate.

  • Bed Adhesion: Make sure your bed is clean. Those elements are small! :)

  • Material: PLA or PETG work perfectly. Print them in bright blue, translucent red, or neon green to match your favorite laser blasts.

💡 Maker Tip

Print a massive batch of 50-100 at a time. It only takes a few more minutes, and you will never have to worry about losing your stud ammo again!

Disclaimer: This is a fan-made, compatible accessory. Not affiliated with or endorsed by any major building block brands. Please note that some of the photos feature original translucent brand-name parts alongside the printed models to demonstrate scale and compatibility.

Happy printing, and don't forget to share a photo of your makes!

Tagi