Durable Plastic Repair Part for Woody Doll’s Voice Box Mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have a Woody Doll with a string that won't retract there is a chance that the plastic part inside is completely…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 166
- Wydruki
- 0
- Wyświetlenia
- 2277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
If your Woody doll’s pull string won’t retract, it’s likely that the plastic part inside the voice box has shattered. In one picture, you can see the red plastic piece that I glued back together as part of my redesign; it was broken into many pieces. The 3D printed replacement part (shown in pink) fits onto the shaft and inside the voice box.
This repair is not easy—it requires carefully disassembling the doll, fixing or replacing the broken parts, and then reassembling everything. However, the effort is worth it because once repaired, Woody works perfectly again.
Keep in mind that there are many different Woody doll models, so you might need to adjust the design to fit your specific version. I have included the original FreeCAD file to help with customization.
Good luck, and hopefully you’ll be hearing “There’s a snake in my boot!” again soon.
Print Settings
Printer:
Elegoo Neptune 2S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
Any PLA
Your Choice
Notes:
The part does not need a high quality print.
Category: 3D Printers