Accessory plate for Xarilk V3 knife sharpener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits neatly on top of the stock base and provides a neat way to store the allen key, sharpening stones, and more!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This plate is designed to print without supports on just about any bed size and fits neatly on top of the existing Xarilk V3 base. It holds 7 stones (6 sharpeners + strop), stropping compound block, the allen key and there's also a spot to store the screw from the stone clamp (which I took off because it's not needed).
Supports are optional and I suggest 0.2mm layers with 3 perimeters. I printed mine in PETG but any filament will work.
if the stones are a bit of a tight fit, work them in and out a little bit (yeaaahhhhh cough sorry) and the abrasive on the stone will open up the slot a little.