Pre-Filter basket / Filter Sieve for Pool Pump Hydro-s FSP350
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pre-filter basket for hydro-s pumps (potentially more).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had bought a used filter pump, which didn't include the filter basket. I didn't find a fitting one, so I designed one for the size I found. It is designed to replace part 89022401 (also found it as 01112051).
The filter is designed so that it has a diameter of 80mm on top, 74mm bottom, 210mm height, a 40mm hole for the inflow and a wall-thickness of 2mm.
I have attached the model file, so you can tune and change it, in case you want to use it for another pump/model -- or if you want to tune it ;-)
I printed in PETG, without supports and 5 wall loops.