1 / 5
Remix of DS3231 Side Mount by edringel | Adds screw holes — zdjęcie 1
1 / 5

Remix of DS3231 Side Mount by edringel | Adds screw holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adds M2 recessed screw holes as an alternative mounting technique to using glue.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

I use the DS3231 often in projects and I liked the side mount design made by @edringel_23. It occurred to me it would be good to have screw holes as an alternative to using glue. I have a favorite subtractor I used to add recessed M2 screw holes (included) that I used to make these remixes.

I also found that my DS3231 modules didn't fit tightly in the circuit board gap due to using thing PCB material. I have included remixes of the original and narrow gap models.

Samples printed in black PLA 0.2mm resolution on a QIDI Plus4 Printer.

Source: https://www.tinkercad.com/things/5HEuTC4QaA3-ds32312mountremixes