trimrouter wall hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mountable hanger for my bosch advanced trim router
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
I wanted something to hang my battery powered trim router on a french cleat hanger. I can screw this to a cleat, but of course it can be screwed onto any vertical surface.
The scad file can be adapted to fit other sizes or other things. I made a small ledge to fit the routing plate, so it doesn't just hang on the printed "fork" bit.
the included 3mf file should include the print settings I used, to print it on it's side with supports for better strength. Also using cubic infill and 3 perimeters instead of the default 2.
Update; I uploaded a new version where I've adjusted the angle and the supports for the hanger, because I've noticed the original version (horizontal) started to sag under the weight of the router. In the new version of the scad file, the angle can be adjusted