Parts for Voltaic Enclosures Soshine Bracket Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable mounts to attach a NEMA enclosure to the Voltaic Enclosures Bracket Mount for Soshine and some related parts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is intended for use with Voltaic Enclosures Bracket Mount for Soshine 6W 5V USB Solar Panel. You'll need the hardware and printed parts from that project.
The enclosure_mounts prints can be adhered to an ABS NEMA enclosure for attachment to the Voltaic bracket. I recommend printing them in ASA or ABS and using ABS cement to adhere them. This method solvent welds the mount to the enclosure and should be very strong. ABS cement can be found in the plumbing section of hardware stores.
I have personally used this enclosure: YETLEBOX Outdoor Waterproof Electrical Box Junction Box Weatherproof IP67 ABS Plastic Enclosure. I recommend using the VE_enclosure_mount_tall print with this one.
The mounts adjust for the non right angle of the enclosure walls, such that the antenna should be perfectly vertical if mounted directly to the bottom of the enclosure inverted.
RAK_angled_v2 will allow you to fit RAK 13302 in the YETLEBOX enclosure.