Sovol Zero Portable Magnetic Tool Tote

One of the things I love most about my Sovol Zero is I can grab it and go fairly easily. Mainly I keep it in my office next to my desk but from time to time I want to do a "relatively" large ABS or ASA print so I just carry it out on my porch or to my basement where it has all the ventilation needed to not be a threat to friends or family. With this little tool kit attached to the metal skin somewhere I also automatically have the basic needs to load/change/purge/unplug filament right there with me! The holder has slots for the 7 mm and 8 mm wrenches for removing the nozzle, the four hex drivers, the side cutters as well as the tweezers. The wrenches, tweezers and side cutters are angled outward from the magnet side so they are easier to remove. The four 10x3mm magnets hold it tightly to any of the Zero's many metal surfaces! If you tuck it carefully inside against the front frame it can even ride there while Zero prints up a storm, no interference (haven't actually tested that though, it would probably be best to move it to the outside surface while printing)!