1 / 8
Bowler - (Clash Royale/ Clash of Clans) — zdjęcie 1
1 / 8

Bowler - (Clash Royale/ Clash of Clans)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bowler from Clash Royale - Clash of Clans)

Ocena
0 / 5
Polubienia
1
Pobrania
38
Wydruki
0
Wyświetlenia
144
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

This 3D model was created with the help of AI 🤖.

Adjustments were made to the arm “rings”, and the entire body, including the arm rings and the pants section, was split so that AMS is not required. Only the pants piece is printed in two colors, so if needed, you can add a pause to print that part.

Eyes on game or anime characters are always quite tricky, so this print does not include painted eyes (as shown in all the images). You can still try painting them in your slicer, but it’s not something I’ve tested myself.

For this print, Bowler is posed sitting down. I felt this was more suitable for better stability and easier printing of the parts (even though splitting the legs was a bit tricky).

About Bowler

Bowler is a peculiar goblin within the game, as his skin has a purple tone due to drinking too much elixir. He is stronger than a regular goblin, which gives him the strength to carry and throw rocks at his enemies.
 

In some splash arts, he is accompanied by a bowling ball - shaped rock, and I'm not sure if it's intentional, but it has a small face-like silhouette.

Print Instructions

General Print Settings

  • Nozzle: 0.4 mm

  • Layer Height: 0.16 mm (Bambu High Quality profile)

  • Wall Loops / Perimeters: 2

  • Detect Thin Walls: Enabled

  • Infill: 15% Gyroid

  • Material: PLA+

Support Settings

  • Support Type: Tree Support

  • Support Angle: 25°

  • Support Placement: On build plate only

Tagi