Death Star 3D Puzzle - Locks in place! Make it explode by spinning!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enjoy my Death Star 3D Puzzle. It locks in place when assembled and can only be disassembled by spinning!
- Ocena
- 4,733 / 5
- Polubienia
- 1559
- Pobrania
- 6894
- Wydruki
- 32
- Wyświetlenia
- 30 401
- Oceny
- 30
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ones assembled, the Death Star is locked and can only be disassembled with a trick: Spin it really fast!
Size: 45mm - DO NOT scale - won't work well. Comment if you want another size or if it's too tight / loose :)
Print takes about 3h, but it's worth it! :)
It's crucial that you use my print settings (see 3MF file). Some very small imperfections will appear, but you can just pull them off.
Esp. important settings:
Print tested for PLA
Supports: Critial Regions Only
Elephant foot compensation: 0.23mm
No Brim
Baisc Setting: 0,2mm layer height - BUT adaptive layer height needed --> down to 0.08 for top parts
Also check out my Spinning Cube 3D Puzzle: HERE