1 / 4
Curtain Rod Holder - short, prevents stray light — zdjęcie 1
1 / 4

Curtain Rod Holder - short, prevents stray light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This rod holder lowers the light leakage around the blackout curtain by putting the rod as close to the wall as possible

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution — Share Alike

This rod holder puts the rod very close to the wall to decrease light leakage around the curtain.

Doesn't look like much on the picture but the impact is significant.

  • Designed for 19 mm but you can resize it easily.

  • Requires only 1 screw to save you holes in the wall.

  • Prints without supports pretty much in any way.

  • I recommend printing it with PETG, 20% infill, fuzzy skin and 0.1 mm layer height. 

Tagi