Digivice Digimon Adventure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplified Digivice design from the Digimon Adventure anime. It's printed in parts for painting convenience.
- Ocena
- 4,5 / 5
- Polubienia
- 204
- Pobrania
- 1023
- Wydruki
- 5
- Wyświetlenia
- 7122
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rework of an older model I made. Comes separated in several parts that snap fit together (with the exception of the screen and antenna parts, these must be glued to the body), so it can be post-processed and painted easier. Made in Cinema 4D and cleaned up for 3D printing in Rhino 3D. No supports needed except on the antenna, where I recommend a raft and support enforcers for the base.
I've also included a fully assembled STL if you don't want to deal with gluing stuff. Be warned though, this last one is untested, so I can't guarantee it'll print correctly, specially the antenna section.
Photos of the print with colored filament by @NotJannet