NordicLab OpenReel 35/120 [Paterson system]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NordicLab Open reel compatible with Paterson Tanks system and size for 35mm film and 120
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 203
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Open reel compatible with Paterson Tanks system and size
Support open source film development tools: https://ko-fi.com/nordiclab
📷 Behind the scenes & photography: https://www.instagram.com/sasha_nordiclab
🛠 Discord: https://discord.gg/JCAADnXDAA 💁
✉ Darkroom Newsletter: https://subscribepage.io/nordiclab
📧 Contact: [email protected]
Printing: Print from PETG, or technical grade materials like PC, PET or ABS if you can.
Recommendation on PETG:
Dry filament before use to have better smooth surface.
Use 0.12 mm height step for printing Design works better with 0,42 (0.38 is better) outer walls and 100% infill, but 15% infill and 3 walls also works fine.
Please print slow! No need to rush, but you will get better tolerances and surfaces
To use generative supports instead if build in - please turn off objects build in.